OPEN ACCESS
- 3D reconstruction and dynamic updating of power grid equipment via fusion of NeRF and lightweight BIM
- Size matters less: how fine-tuned small LLMs excel in BPMN generation
- Mechano-electro-optical conversion dynamics in mechanoluminescence and its application in remote human–robot interaction
- Highly sensitive self-calibrating birefringence measurement based on anisotropic laser feedback polarization effect
- Hybrid deep learning and handcrafted feature fusion for pneumonia detection in chest X-rays
- Predictive network congestion management for enterprise systems: a graph neural network approach with operational insights
- Photon avalanche nanomaterials: from spark to surge
- Artificial intelligence and big data in health policy and management: a comprehensive bibliometric analysis
- Programmable structured DUV illumination by coherent harmonic generation at crystalline solids for nanometer-resolution inspection of periodic samples
- RNN-driven joint channel estimation and interference cancellation in FBMC: a breakthrough for 5G and beyond
- Sub-nanosecond heat-based logic, writing and reset in an antiferromagnetic magnetoresistive memory
- Hybrid high-index composite meta-structures with atomic layer-coated nanoparticle-embedded resin
- Photonic transformer chip: interference is all you need
- Analyzing the effect of developer’s emotion on the quality of open-source projects
- Data lakes versus data warehouses: choosing the right approach for big data analytics
- Modulation of ultrafast soliton molecules enabled by plasmonic metafibers
- Hybrid data mining for pandemic public opinion analysis: integrating sentiment, topic, and geolocation data
- Speed bump detection on LiDAR point cloud for autonomous vehicles
- Sparse hybrid-field channel estimation in massive MIMO systems
- A quantum annealing-based approach for IP traceback in WSNs
- Physics-informed machine learning for compact modeling and variability prediction of 2D material-based THz transistors
- Adaptive infrared thermal camouflage of multi-layer PCMs devices via laser-electric co-modulation driven by neural network
- Harnessing forward scattering effect for high dynamic imaging
- Scalable, ultrathin, highly selective and emissive films by microsphere-polymer coupled metasurfaces for passive radiative cooling
- Second-level high-speed 3D isotropic imaging of whole mouse brain using deep-learning spinning-disk light-sheet microscopy
- P2P-CKKS: enhancing homomorphic encryption efficiency via dynamic power-of-two vector padding
- Ultra-low photodamage three-photon microscopy assisted by neural network for monitoring regenerative myogenesis
- Machine-learning-powered efficient design of photonic crystal cavities
- PWM sensor-less balancing technique for the three-phase seven level PUC-NPC converter
- Frequency comb-based time-domain tracking of AFM cantilever dynamics from picometre-scale noise to micron-scale nonlinear motion
- Mid-infrared single-pixel imaging via two-photon optical encoding
- Fiber laser based stimulated Raman photothermal microscopy towards a high-performance and user-friendly chemical imaging platform
- Empowering text classification with NLP and explainable AI for enhanced interpretability
- Dispersion-engineered compact twisted metasurfaces enabling 3D frequency-reconfigurable holography
- Multi-color pulsed chaos enables single-pixel parallel laser ranging
- 5.2-THz-bandwidth miniaturized spectrometer using a GHz-tunable laser
- Conversion of 2D picture to color 3D holography using end-to-end convolutional neural network
- Energy management of integrated PV/thermal systems in industrial applications
- Comparison of approaches for tessellating a business area using Voronoi diagrams
- Efficient local trajectory generation for self-driving cars: combining waypoints, spline curves, and predictive control
- Wireless multi-carrier transmission techniques for commercial deployment in LTE, LTE-A, and 5G FR1
- Dynamic effect of a memristive load on a flying capacitor boost converter with three switching levels
- Adaptive weight-modified Riesz mean filter for high-density salt-and-pepper noise removal
- A review of radiofrequency-induced heating challenge caused to medical implants during MRI procedures
- Comparative analysis of deep learning models for effective denial of service (DoS) attack detection in network security
- Optimizing decentralized energy: a comprehensive review of distributed energy resource modeling
- Phase-gradient metasurface enables atomic spin chirality detection for elliptically polarized laser-pumped atomic magnetometer
- A review of recent developments in photonic crystal fibers (PCFs)-based biomedical and chemical sensing applications
- CNN-based modulation classification using image processing techniques for OFDM underwater acoustic communication system
- Surface plasmon driven atomic migration mediated by molecular monolayer
- An 8 × 200 Gbps wavelength-division multiplexing transmitter using lithium tantalate
- An ultra-highly sensitive LITES sensor based on multi-pass cell with ultra-dense spot pattern designed by multi-objective algorithm
- Adaptive visible-infrared camouflage with wide-range radiation control for extreme ambient temperatures
- Swarm intelligence in handling of big data
- The jellyfish algorithm: a new approach for enhancing coverage, reducing energy consumption, and extending network lifetime in underwater wireless sensor networks
- Circular patch antenna as grain moisture sensor for smart agriculture
- A smart walking stick with voice guidance in an African language for visually impaired persons
- Polarimetric binocular three-dimensional imaging in turbid water with multi-feature self-supervised learning
- Design and fabrication of ultralow-cost and portable high-voltage power supply system for electrohydrodynamic applications
- Advanced semantic lung segmentation with a hybrid SegNet-ResNet50 network
- Data-based insights into the usage of micromobility sharing
- A composite Gauss–Legendre quadrature method for the Q-function approximation and its application in 6-bit symbol sequence modulation over generalised fading distributions
- In-situ grown polymer-ceramic scintillator and applications on X-ray multi-energy curved surface imaging
- An improved acoustic howling control technique with reduced computational load requirement
- Time series analysis of energy usage patterns by Tanzania large power users
- Analyzing the effect of asymmetrical thermal flow in three phase induction motor
- Wavelet kernel and convolution neural network based accurate detection of incipient stator and rotor faults of induction motor
- A framework for model-centric prototyping in cloud mobile application development applied to rationalized energy consumption
- Vyoma commerce: a blockchain-based decentralized architecture to combat fraud and enhance security and trust in Bangladesh’s e-commerce ecosystem leveraging smart contracts, supply chain transparency, and digital identity
- Application of machine learning with gradient descent method for load forecasting: a performance analysis
- The dual-edged potential of AI autonomously defining loss functions
- A comprehensive review of machine learning applications in forecasting solar PV and wind turbine power output
- A novel economic load dispatch method of microgrid based on hybrid slime mould and genetic algorithm
- Urban sentinel: advancing structural health monitoring for building damage measurement in districts through IoT integration and self-optimizing machine learning
- A machine learning-powered energy consumption prediction system with API
- Extreme anti-interference capability in temporal and frequency domain by utilizing laser Antenna in optical wireless communication system
- Achieving high-accuracy skin cancer classification with deep learning optimized by ant colony algorithm
- Colorless and unidirectional diffractive-type solar concentrators compatible with existing windows
- Multifunctional metamorphic III-V distributed bragg reflectors grown on si substrate for resonant cavity surface emitting devices
ABSTRACT
- Research on joint optimization of rate and energy harvesting in STAR-RIS-empowered SWIPT system
- Design and optimization of a 1–7.8 GHz wideband low noise amplifier with 2 dB noise figure
- A multi-harmonic class-D FSK power and data transmitter with enhanced load power delivery and high data rate to carrier frequency ratio for biomedical implants
- A real-time FPGA-based hardware module for adaptive noise correction in cardiac bioelectronic systems: Toward robust signal conditioning for implantable biosensors
- A 4T1C cryogenic inverse CMOS memristor emulator for quantum computing application
- A low-cost dual-band metasurface-based circularly polarized patch antenna with enhanced gain
- Design of a dual-band co-polarized in-band full-duplex antenna with broadside radiation
- Transmission-gate based Phase Frequency Detector and 0.33% current mismatch MOS charge pump for reference spur reduction in 2.5 GHz PLL
- A parallel Class-E power amplifier with doubly-tuned transformer-based load network and high-efficiency cascode in 110-nm CMOS
- A Ku-band mechanically tunable bandstop filter in groove gap waveguide
- A low loss tri-band negative group delay circuit with resistors
- Fuzzy knowledge-based ant Colony Optimization for Sequential RFID network design in hospitals using heterogeneous readers and antennas
- Spiking neural network with 1T-1R RRAM synapses and CMOS LIF neurons for in-situ learning and pattern recognition
- Wideband slot antenna with controllable absorptive sidebands based on multi-mode absorptive resonators
- Design of a flexible compact insensitive wearable antenna for enhanced performance stability
- Anti-Interference wireless communication using backscatter and deep learning: modeling, detection, and evaluation
- Wideband RCS reduction in microstrip antennas using integrated artificial magnetic conductors and frequency-selective surface
- A low-profile high-gain SIW center-fed millimeter-wave phased array with wide-angle scanning for 5G applications
- On the behavior of cascaded Gaussian impulse response filters
- Reconfigurable versatile temperature-insensitivity immittance simulators with electronic tunability using commercially available ICs
- Low-power, high-speed ternary adder using multi-threshold GNR transistors for efficient digital computing architectures
- A triple-loop hybrid-domain LDO with wide operating range and 47 ns recovery in 180 nm CMOS
- Resource allocation for high-speed railway train-to-train communications: A novel AC-Mix reinforcement learning method
- Joint caching and power allocation with sequential demand prediction in wireless edge networks
- Enhancing SM MIMO performance under non-ideal transceiver hardware via full-duplex UAV and antenna selection
- A 16T SRAM cell with integrated radiation hardening and half-select disturbance immunity
- A low-kHz LCC-S inductive power transfer system for sensor powering through non-perforated aluminum barriers
- Efficient channel shortening filters for in-package chip-to-chip wireless communication
- Joint parameter estimation for near-field signals with the COLD array
- Retraction notice to “High gain and frequency reconfigurable copper and liquid metamaterial tooth based microstrip patch antenna.” [Int. J. Electron. Commun. 137 (2021) 153799]
- A coplanar amplifier antenna with seamless integration of filter as input matching network
- Discharge activity analysis and hardware implementation of functional electronic components coupled magnetic sensing neurons
- A compact dual-band power amplifier using spoof surface plasmon polaritons for broadband RF applications
- A broadband CMOS LNA with ultra-low balun error and enhanced power efficiency
- A grid current feedforward control method to suppress output current harmonic of virtual synchronous generator under distorted grid
- onMachine learning assisted K-means++ clustering based phase quantization method for enhanced gain reflectarray design
- A single-layer wideband reflectarray for independent beam generation in dual circular polarization
- A coverage-enhanced rectifying array antenna for RF energy harvesting applications
- A novel AlGaN/GaN HEMT with no underlying buffer utilizing a stacked (HfO2/SiN) passivation architecture for enhanced high-power and high-frequency performance
- Inverse active filter based on DDCC and its application as tunable inverse filter
- 1-D CNN-based timing synchronization leveraging post processing with perception assistance in UAV communications
- High-gain wideband low-cost series-parallel fed stacked patch antenna array for 60 GHz unlicensed band
- Enhanced CSI feedback via deep learning based denoising in FDD massive MIMO
- Energy efficiency optimization in heterogeneous dual-hop WBANs using memory-learning based adaptive multi-strategy algorithm for reliable space medicine
- Levy Flight-Augmented Artificial Circulatory System Algorithm for optimal PID tuning in DC motor control
- Dynamic power and platoon management for reliable vehicle platooning in mode 4 C-V2X communications
- High-efficiency CMOS rectifiers with wide power dynamic range based on leakage-current-suppressing and adaptive-biasing techniques for RF energy harvesting
- Design, implementation, and validation of a MOSFET–inductor-based switching emulator circuit for modeling and investigation of memristive behavior
- New multipliers based on mixed-mode controlled analog building blocks
- Energy-efficient summer with enhanced bandwidth for decision feedback equalizer
- Nanoscale 9T SRAM circuit for enhanced performance in digital and mixed-signal applications
- Robust fractional controller for closed-loop chemotherapy dose scheduling
- Tunable T-type network parameters determination method based on improved beluga whale optimization for a MHz WPT System’s adaptive impedance matching
- A high-gain LHCP antenna loaded with metamaterial for microwave energy harvesting application in the Wi-Fi band
- Microstrip patch array fed compact single-layer reflectarray antenna system for k-band satellite applications
- A dual layer SIW based microwave sensor for microplastic detection with enhanced sensitivity and machine learning approach
- Achieving high selectivity in wideband filtering antennas for 5G-N41 band using multipath coupling techniques
- Design of multi-frequency bandpass filter with reflectionless characteristics
- Multi-IRS aided NOMA based IoT framework for reliable and secure communication
- Ultra-compact dual-band frequency selective metasurface for enhanced coverage in non-line-of-sight mmWave 5G communications
- A multi-step conical monopole antenna with conformal metasurface for ultra-wideband and wide-angle RCSs reduction
- Analysis of energy-harvesting relaying over S-V modeled Rayleigh and fluctuating Nakagami-m channels for disaster recovery
- A multi-scale feature radio frequency fingerprint identification method for LFM signal
- Designing general 4-D chaotic and hyperchaotic systems with hidden oscillations and application in wired encryption transmission
- Dynamic cluster kernel-based channel modeling algorithm for High-Speed railway scenarios
- Temperature stability and compensation of AMR sensors in practical applications
- Stretchable wideband dipole antenna using machine learning assisted optimization for soft electronics
- A low-profile high-stopband-suppression filtering slot antenna using a dual-mode SIW cavity
- Zero Forcing detection in spatially correlated rayleigh/inverse gamma composite fading channels: A sum rate perspective
- Cavity-backed phased array CPA, a novel antenna topology based on transmit-arrays with cavity excitation
- Low-profile broadband magnetoelectric dipole antenna based on printed circuit Board
- Coded metasurface-based cooperative design for terahertz band radar cross-section reduction and holographic imaging
- Dual-band diplexers based on electric/magnetic separate coupled VFSIRs and self-packaged substrate integrated SCPW hybrid technology
- Introduction to BeamWave Matrix for beam-forming and wave manipulation applications
- A dual-band dual-polarized endfire antenna with high isolations and large frequency ratio
- Full-space scanning leaky-wave antenna based on double-layer dual-period SSPPs
- A dual-band reflectarray with circular polarization diversity for K and Ka band applications
- AMORT-FIS: adaptive metaheuristic-optimized real-time fuzzy inference system for RFID network planning using heterogeneous directional antennas
- A low noise low dropout regulator with pre-amplified stage and multi-order adaptive zero compensation technique
- Orientation-independent concentric flower-shaped Chipless RFID tag for tracking applications
- 2-D DOA estimation based on augmented structured Nyquist correlation reconstruction for L-shaped nested array
- Next-Gen wireless unleashed: Coplanar waveguide antennas on glass for 5G and beyond
- A series of reconfigurable topologies with CC-to-CV transition capability for IPT battery charger
- Bio-realistic evaluation of an implantable antenna for safe neurostimulation medical system
- Compact polarization-reconfigurable AFSIW array with integrated biasing network
- Feasibility of Physical Unclonable Function (PUF) implementation using the pull-up/pull-down resistances integrated in microcontrollers GPIO
- A novel design of RIS unit cell with ML-PSO based varactor diode tuning for optimal reflection characteristics
- Broadband low-profile and Low-RCS circular polarization metasurface antenna based on hybrid mechanism with characteristic mode analysis
- Optimization and performance analysis of UAV-based full-duplex systems with residual transceiver hardware impairments
- Miniaturized quad-element UWB MIMO antenna with reconfigurable X/Ku/K-band notched performance for cognitive radio application
- EHRP-WSN: Energy-Efficient Hyperheuristic Routing Protocol for Wireless Sensor Networks
- An Ultra-Low Noise, Power-Efficient AFE based on Current-Reuse and splitting techniques for Multibiosignal acquisition
- Al2O3 Ceramic-Based Swastika-Shaped Quad-Port MIMO antenna with diversity feature for 5.9 GHz intelligent transport systems applications
- Design of monopole antennas with various grounds for 2.4 GHz applications
- An improved multifunction network using two current feedback operational amplifiers
- Sub-threshold 10 T FinFET-based single-ended SRAM cell for energy-efficient high-speed operation
- Adaptive network-wide superspreader detection using programmable switches
- Study of the insertion of corrugations in microwave filters for mitigation of the multipactor effect
- A 5.56 ppm/°C curvature-compensated CMOS voltage reference using reverse body biasing technique
- Satellite access points selection for cell-free LEO networks
- Investigating a CNT-based Dickson charge pump with linearly distributed capacitance working in FSL
- Analysis and design of a load-independent clamped class E inverter
- A dual-band frequency-selective surface with rectangular filtering characteristic for the second band enabled by harmonics resonance
- Active metasurafce based transmittive and reflective type reconfigurable multifunctional polarization converter
- Block Amari Alpha least mean square algorithm based channel estimation for MIMO network
- Design of a compact, wideband, Diagonal Square Fractal MIMO antenna for vehicular communication
- A compact frequency-reconfigurable magneto-electric dipole antenna with aperture-coupled excitation for 5G and ISM/WLAN applications
- A modified harmonic minimization scheme for seven-level CHB multilevel inverter with improved voltage harmonic profile and grid code satisfaction
- Third-order single-T and bridged-T LC oscillators and application
- A filtering power divider with high selectivity based on surface acoustic wave resonator
- Antenna integrated novel metasurface for simultaneous wireless information and power transfer
- A radiation hardened In-memory computing SRAM for soft error tolerance in safety critical applications
- A -122 dB PSRR curvature-compensated bandgap reference with cross-connected NPN
- A 0.05–20 GHz ultra-wideband CMOS circulator with differential compensation transistors and differential delay lines
- A topology optimization method for designing dielectric microstructures in low-profile and lightweight phased antennas with enhanced scanning capabilities
- A parallelized SIW microwave cavity resonator for compact high-Q low phase noise VCOs in 5G and GNSS applications
- A 18–24.5 GHz high-power-density GaN MMIC power amplifier with impedance-frequency-tracking-based wideband matching approach
- Exhibiting the superiority of metal-filled SSPP in advanced output matching networks for high-performance power amplifier
- Direct demodulation approach for regular hexagonal QAM constellations
- Flip-flop topology inspired forward deep neural network learning approach for modelling UWB antennas
- A concurrent dual-band LNA for 2.4 GHz and 5.2 GHz application based on active inductor technic
- Highly miniaturized Gysel power divider with suppression of harmonics employing multiple transmission line techniques
- AI-powered inverse design of Ku-band SIW resonant structures by iterative residual correction network
- Reconfigurable intelligent surface-assisted AFDM for high-mobility communications
- Thermally reconfigurable quad-port MIMO antenna with independent frequency tuning
- An ANN-based distributed secondary controller used to ensure accurate current sharing in DC microgrid
- A metamaterial-integrated shared-aperture planar antenna with microwave electrically small property and millimeter-wave electrically large property
- Spiking neural network circuit with op-amp based LIF neuron and RRAM synaptic array
- A wideband frequency selective surface with high roll-off characteristic
- Design of a fourth-order bandpass frequency selective surface via aperture-coupled approach
- Memristor-regulated multi-scrolls generation method in a cellular neural network
- Synergistic impact of parametric variation and gate misalignment on gate-oxide stacked junctionless MOSFETs for biosensing applications
- A radar signal sorting algorithm based on intra-pulse multidimensional feature fusion
- Joint optimization algorithm for continuous/discrete phase beamforming in active Reconfigurable Intelligent Surfaces
- A CMOS D-band power combiner with compact size and low insertion loss using packaging-aware design
- TFCED: A novel smart primary user emulation attack detection for cognitive radio sensor networks
- Coherent DOA estimation via Toeplitz-based tensor decomposition
- A compact flexible and biodegradable dual wideband implantable antenna for biotelemetry
- Unsupervised surrogate-assisted synthesis of free-form planar antenna topologies for IoT applications
- Compact beam-scanning luneburg lens antenna using transformation optics and low-cost additive manufacturing
- A Multi-Octave mode transfer-based harmonic tuned power amplifier (MMHPA)
- Multi-objective joint resource allocation for IRS-assisted SWIPT System with Quantum Sand Cat Swarm Optimization
- New universal voltage-mode LT1228-based second-order filter with SIFO-type and TISO-type configurations
- Wideband hybrid AEH system: Exploring transparent and opaque materials for sustainable power solutions in small gadgets
- High-performance and robust triple node upset radiation hardened latch design
- A novel code index modulation for an efficient sparse code multiple access differential chaos shift keying system
- A closed-loop neural recording analog front-end with low noise and automatic gain control amplifiers
- HAPS assisted cooperative offloading for space–air–ground integrated networks
- High efficiency and low group delay in an ultra-compact H-shaped directional coupler for 5G applications: an AI-based optimization approach using genetic algorithms and neural networks
- Design of a compact size dual-band frequency reconfigurable conformal antenna for heterogeneous applications
- An analytical framework for optimized design of mixed-signal accelerators with F-2T2R cells
- ANYF: A hybrid deep learning model for radiation sources localization through radio maps automatic interpretation
- RF energy harvester design using a dual-band rectenna for ultra-low-power electronic systems
- A novel 5G antenna design using metamaterial
- Highly efficient, broadband, hexagonal shaped rectenna for energy harvesting in IoT applications
- High-isolation broadband 12-port X-band MIMO antenna with via decoupling, polarization conversion, and RCS reduction
- Joint optimization design of cross-domain NOMA-OTFS scheme in vehicular MU-MISO system
- A minimal memristor emulator using DVCCTA for analog neuromorphic logic
- Guest Editorial Special Issue on Selected Papers from SMACD 2024
- Ultra-wideband dual-polarized shared aperture antenna with gradient refractive index metamaterial lens
- Resistorless electronically tunable floating memtranstor emulator and its application to chaotic oscillators
- Capacity and secrecy analysis of URLLC channels subject to Lomax fading
- A tunable multifunction fractional-order filter based on a single MVDTA
- Design of SFMSIW MIMO antenna with low mutual coupling using notch filter
- A low-RCS and high gain microstrip patch antenna using meander line for wireless communication
