OPEN ACCESS
Coming soon
ABSTRACT
- Ternary doping enables structural stabilization of nanoporous Ni for adiponitrile hydrogenation
- In vitro and ex vivo evaluation of the rheological properties, tribological performance, and oxidative stability of cellulose nanocrystal–enhanced hyaluronic acid suspensions as potential viscosupplements
- Wetting behavior and flow-pattern transitions of ionic-liquid falling films on vertical tubes
- Numerical simulation of an oscillating multi-fiber filter using a coupled Eulerian-Lagrangian and the immersed boundary method
- In situ milling-media retention enables the continuous preparation of hollow HNS microspheres by coupling acoustic-resonance-assisted ball milling with microfluidics
- Why does a liquid segment shift occur in the Archimedes Tube Crystallizer and how does it affect system performance?
- Tailored D-π-A pyrene polymers boost photocatalytic cascade valorization of biocycloalkenes to cyclobutane aviation fuel
- Soft sensor modeling based on Correlation-Enhanced Self-Organizing interval Type-2 fuzzy neural network
- Synergistic metal-acid catalysis over mesopore-confined SiW/Ni-MCM-41 for lignin-to-aromatics valorization
- Dispersed fluid flow in a periodic converging-diverging microchannel
- Porous silica nanoparticles as novel foam stabilizer under high salinity and presence of crude oil
- Hydrothermal pretreatment enables disordered hard carbon with enlarged interlayer spacing and abundant closed pores for high-performance sodium storage
- Temperature-driven wettability switching of nanoparticles for regulating emulsion inversely thermoresponsive stability
- Mn-doped polysaccharide-derived calcium-based sorbents with enhanced CO2 capture and cyclic stability
- Plasma-induced fluorine recycling from perfluoroalkyl acid into active MOF catalysts: Unlocking lattice oxygen for enhanced electrocatalysis
- Adsorption performance of radial-flow contactors for direct air capture: A computational study
- Elemental partitioning and mineralogical transformations of associated trace metals (Tl, Be, Cr) during the beneficiation and pyrometallurgy of lepidolite
- Integrated membrane-dispersion fixed-bed reactor with Co@CN/Al2O3 catalyst for continuous and efficient CO2 cycloaddition
- Carbon-coated hydrophobic Al2O3 for permanganate activation: Brønsted acidity outperforms Lewis acidity in antibiotic degradation
- Scale-up CFD analysis of spray towers for CO2 absorption: Design implications of multi-stage spray architectures
- An adaptive-grid strategy for HMMC population balance equations
- Machine learning-assisted design of thermosensitive highly efficient adsorption agents modified with cucurbituril for lithium extraction from Salt Lakes
- Chemo-bio coupled conversion of carbon dioxide to high-value chemicals
- CO2 conversion to formic acid/formate assisted by salinity gradients energy by reverse electrodialysis and assisted reverse electrodialysis
- Enhanced CO2 separation in ZIF-8+TpPa-1/PEBAX®2533 mixed-matrix membranes: insights into diffusion and sorption contributions
- Nitrogen-doped graphene composite with optimized pyridinic/pyrrolic configurations for high-performance NH4+ storage
- Electron-rich lignin-derived carbon triggered interfacial water regulation for accelerated hydrogen evolution kinetics across the full pH range
- Deep learning assisted discovery of ionic liquids for aromatic sulfur and nitrogen compounds extraction from FCC diesel: Experimental and molecular insights
- Dual-site synergy on Cu/Al2O3-CeO2-Ov: Localized vacancies enable water-assisted hydrogen supply and electron-rich interface promotes methanol synthesis
- Nanobubbles as nucleation sites for the controlled pharmaceutical crystallization
- Numerical investigation of cohesive powder fluidization in metal powder energy systems via a coarse-grained CFD-DEM framework incorporating the SJKR model
- Recyclable ultrastrong bioadhesives enable closed-loop engineered composites based on reversible bonds
- Scaled-up flash vacuum pyrolysis for efficient synthesis of benzocyclobutene
- Identical colloid interactions under different electrostatic constraints. The case of monovalent salts
- Heterogeneous transfer learning for dynamic soft sensing in naphtha hydrotreating and catalytic reforming units using semi-supervised long short-term memory autoencoder and extreme gradient boosting
- Co-hydrogen-bonded organic framework endowing ammonium perchlorate with accelerated thermal decomposition and enhanced combustion performance
- A multimodal deep learning framework for physics-guided anomaly detection and time-series prediction
- Asymmetric planar four-metal-atom cluster ZrCu3@C5N2H2 for cooperative nitrogen reduction
- Interfacial structure and kinetic mechanism of anthracite wettability alteration induced by SDBS-SiO2 composite nanofluids
- Investigation on premixed flame development and CO emission in self-sustained lean combustion with different pellets sizes
- Mechanisms, kinetics, and ecotoxicological effects of MCPA and MCPP in hydroxyl radical-based advanced oxidation processes
- Preparation and performance evaluation of a high Temperature–Resistant and Scale-Inhibiting hydrophobically associating fracturing fluid
- Enhancing Pt/Co separation selectivity of P204-P507/XAD-4 resins through Dual-Site modulation involving alkaline activation and HFIP masking
- Deep learning assisted entrainer screening and process design for xylene isomers separation by extractive distillation
- A novel reduced-order framework combining progressive spatio-temporal decoupling and independent parallel Gaussian process regression for transient multi-physics prediction of RTC reactors
- Modeling of enzymatic membrane reactors for dextran hydrolysis: Coupled reaction-separation mechanisms
- Adjusted Gaussian kernel for coarse-grained CFD-DEM at extreme cell-to-particle size ratios
- Sulfur vacancy engineered FeS2 nanosheets for boosted O2 activation and photocatalytic valorization of 5–Hydroxymethylfurfural
- Process intensification of chitosan ozonation in a rotating foam stirrer reactor: Coupled gas–liquid mass transfer and depolymerization kinetics
- Multilevel screening of dual-role ionic liquids as solvent and phase transfer catalyst for efficient aromatic O,S-glycosidations
- Investigation on heat transfer, hydrogen production, and performance optimization of ammonia decomposition reactors via CFD and machine learning
- Kinetic modelling of CO2 hydrate formation in Arabian Sea sediments: application in CO2 sequestration
- A model-based statistical framework for the design of experimental campaigns in industrial catalyst testing
- Temperature-mediated modulation of S vacancies in ultrathin ZnIn2S4 nanosheets inducing charge separation for enhanced photocatalytic degradation
- An EMMS-based structure-dependent mixture model for heterogeneous gas–solid fluidization
- Deciphering the role of oxygen vacancies in bimetallic NiCo catalysts for syngas production from toluene reforming
- Addition strategies of the adsorption models in granular layer desulfurization simulation
- Experiments and computational modelling of transport effects in a packed bed reactor: The case of aqueous phase reforming
- A comparative analysis of the kinetics of levulinic acid esterification with different alcohols
- Integrated extraction–oxidation mechanism in MIL-100(Fe) porous ionic liquids for efficient fuel desulfurization
- Evaluating mixing in a twin-screw reactor with Finite-Rate reaction via multi-scale simulation
- Defect-engineered S-scheme photocatalyst enabling integrated CO2 capture and conversion to CH4 under visible light and sub-ambient pressure
- A buffer microzone for controllable formation of viscous droplets in a T-junction microchannel
- mSiO2-CQDs-Au@Ag nanocomposites for sensitive SERS detection of amisulpride: performance and mechanistic insights
- High charge density cationic wood for efficient I-/IO3- capture via electrostatic and redox interactions
- Ultrahigh‑permeance ceramic membranes for hot-gas filtrationfor energy sustainability
- Synergy of intramolecular/intermolecular amino groups with proton transfer for efficient CO2 capture in multi-amino blended systems
- Sustainable recovery of strategic metals from spent battery leachate using neutral coordination-type hydrophobic deep eutectic solvents
- Mechanistic study of the regulatory effects of key discharge parameters on plasma-assisted microscale methane combustion
- Retention–mobility crossover during CO2 displacement of adsorbed methane in shale nanopores: Roles of pore confinement, interfacial chemistry, and water-mediated site blocking
- Physics-informed co-driven multi-timescale scheduling for LNG terminals under dual-side uncertainties: A Wasserstein DRO framework with asset health management
- Cooling characteristics of evaporative water droplet released into a vacuum environment
- Axial coordination engineering of high-density intrinsic Fe–N5 sites for efficient oxygen reduction
- Nickel-based hydrotalcite-derived catalysts for efficient hydrogenolysis of C–O bonds in benzyl methyl ethers
- Rational structural modification of CeO2@silicalite-1 with N2 plasma treatment for dimethyl carbonate synthesis from CO2
- Stoichiometric modeling, existence, stability, and optimal control of multi-species sodium carbonate formation using cPINNs with PDFP optimization
- Development of multi-network thermosensitive hydrogels and mechanism investigation for suppressing coal spontaneous combustion
- An explicit homogeneous-heterogeneous dynamic structure decomposition for few-sample mode monitoring
- Co-treatment of secondary aluminum dross and municipal solid waste incineration fly ash for heavy metal stabilization via in situ Friedel’s salt formation
- Hydrate deposition under a sustained thermal gradient during deepwater well shut-in: effects of inhibitor volatility and emulsion phase state
- On the dynamics of gas-solid flow in a pilot-scale CFB riser: an experimental analysis
- Multiscale modeling of bubble cross-interface dynamics in a water–oil-gas multiphase reactor using a coupled VOF-DBM-LES approach
- Resolving the compatibility–performance tradeoff in ZIF-8/PIM-1 mixed-matrix membranes for propylene/propane separation through additive-dependent interfacial coupling
- Hollow CoS2/MoS2 heterostructures integrated with Ti3C2Tx MXene for enhanced interfacial kinetics and durable sodium-ion storage
- Tuning diffusion modes in micropore reactors enables efficient gas-liquid transport for CO2 electroreduction
- Fast feasibility assessment of gas network transmission by selective surrogate embedding of compressor operating envelopes and convexified hydraulic constraints
- Intelligent molecular design of working fluid and multi-objective optimization of system for ocean thermal energy conversion
- Clean vanadium extraction from vanadium slag via low-temperature co-roasting with sodium oxalate and sodium carbonate
- Tuning of physicochemical and photocatalytic properties of dual-phase TiO2: Rare earth mono-doping versus co-doping
- A review of coupled computational fluid dynamics–population balance model and machine learning frameworks for crystallization processes
- Hierarchical federated assisted optimal scheduling of heterogeneous integrated energy systems: A constraint-aware lightweight reinforcement learning framework
- Highly sensitive electrochemical detection of oxytetracycline using a Ni-MOF modified electrode and its complete removal by ternary metal layered double hydroxide nanoparticles
- Constrained sensing and reliable state estimation with shallow recurrent decoders on a TRIGA Mark II reactor
- A review of tandem matching for chemical reactor design
- Flow behavior and residence time optimization of Geldart C desulfurization ash particles in a loop-coupled circulating fluidized bed riser
- Forecasting temporal profiles of Fe/C catalyst coking in methane pyrolysis via moving window neural networks
- Efficient solution of the two-stage stochastic pooling problem using piecewise linear neural networks
- Molecular mechanism and economy-environment-flexibility-safety (EEFS) analysis of extractive distillation with mixed-extractant for n-butanol/tetrahydrofuran/water separation
- Metallic samarium embedded in carbon nanobundles as a bifunctional separator modifier for high-loading and long-life lithium-sulfur batteries
- Numerical study on the optimization of slag retaining wall shape parameters in a submerged side-blown bath smelting furnace
- Fabrication of biomimetic pinecone-inspired photothermal evaporators with phase-change microcapsules for all-weather desalination performance
- Defect-rich hierarchical zeolite-supported Ni-Fe catalysts: synergistic catalysis toward efficient furfural hydrogenation- rearrangement to cyclopentanone
- In-situ particles morphology characterization in chemical crystallization processes: An image analysis framework based on attentive particle shape feature fusion (APSFF)
- A scenario-based distributionally robust optimization strategy for ethylene cracking furnace scheduling under price uncertainty
- Process flowsheet optimization integrating mixed-integer programming and surrogate models with adaptive uncertainty
- Biomass carbon quantum dot-modified polyaspartic acid, used as an efficient scale inhibitor and corrosion inhibitor with fluorescent properties
- Tailored ternary deep eutectic solvents for recyclable extractive desulfurization of coal pyrolysis oil
- Numerical & experimental validation of Vanadium-Titanium flow battery for general flow battery simulation model development
- A spatiotemporally switchable polyphenol–MOF redox hydrogel for dual pH/temperature-regulated release and ROS modulation in infected microenvironments
- Portable electrochemical platform integrating MnOOH/expanded graphite composites and smartphone for on-site detection of bisphenol pollutants
- Ternary metallic nitride TiAlZnN@CF anode electrocatalyst with enhanced activity and long-term stability for oxygen evolution
- Facile preparation of an efficient and stable SO42-/CuO-Hβ composite catalyst for rapid low-temperature CO2-loaded amine solvent regeneration
- Ternary heterostructure-enabled enhanced electrochemical deionization using cobalt/cobalt phosphide encapsulated in N, P co-doped carbon nanotubes
- Pulsed bio-electricity from biogas slurry degradation achieved high-efficiency anaerobic methane production in microbial electrolysis cells: Microbiological mechanisms and life cycle assessment
- Spin-state-regulated selectivity switching between urea and ammonia in N2O/CO electroconversion on MXene-supported transition-metal dimers
- Kerogen nanopore deformation and CH4/CO2 adsorption under different triaxial stress regimes: implications for shale gas recovery and carbon sequestration
- A multiscale kinetic study of polyethylene pyrolysis by integrating thermogravimetric analysis, ReaxFF molecular dynamics, and data-driven modeling
- Hydrogen transfer and coke suppression during kerogen conversion in supercritical water: A ReaxFF-MD study
- Balance the proximity and loading of metal and acid sites: Effects on the hydroisomerization of acenaphthene to alkyladamantanes
- Model-based design of experiments for spray drying using frozen airflow CFD-DPM simulations
- Catalytic pyrolysis of waste plastics to liquid fuels: pathways, mechanisms, and challenges
- Acclimation-enhanced methane biooxidation by methanotrophic consortia and coal-rank-dependent interfacial modification
- Review on hydrogen detection by WO3 films: structural characteristics, detection mechanisms, and performance optimization
- Analysis of particle trapping and crossing at liquid interfaces using GPU-accelerated DEM-SPH with a single-phase continuous surface force model
- Modulation of three-phase interface microenvironment on nitrogen-doped carbon by fluorine-based deep eutectic solvent for improved oxygen reduction reaction
- Shattering material discovery bottlenecks with constraint-driven emerging materials molecular designer
- Simulating ion transport through random arrays of static spherical bubbles
- Machine learning driven quantification of local bubble dynamics across a pilot scale stirred bioreactor
- Causality-Guided predictive process monitoring for incipient fault detection and early warning in dynamic industrial processes
- Pt/PtO2 heterostructure enable heterolytic H2 activation for low-temperature hydrogenation of industrially relevant concentrated HMF to BHMF in water
- Adsorption performance of an imidazolium/pyridinium bis-onium hierarchically mesoporous organic polymer toward pharmaceuticals and dyes
- Experimental research on miscible CO2-water flooding mechanisms and CO2 sequestration performance in a low permeability oil reservoir
- Density-dependent Na single-atom catalysts toward efficient synthesis of dimethyl carbonate
- Integrated electrocatalysis-redox flow desalination system for efficient ammonia production from dilute nitrate
- In situ self-assembled synthesis of Au-yolk–shell SnO2 Schottky heterojunction enabling coupled photocatalysis-PDS activation for durable gatifloxacin removal and bacterial disinfection
- Manipulation of co-ordering behaviour in crystalline-amorphous PEO-based block copolymers for one-step fabrication of hierarchical organized breath figure arrays
- Site-selective Pt anchoring on YMn2O5 mullite: tailoring Pt-O-Mn interfaces for boosted NO oxidation
- Turning waste PHA into denitrification media: performance driver and stratified biofilm ecology
- Hierarchical amphiphilic g-C3N4 interface engineering enables maximized external active site utilization for ultrafast extractant free oxidative desulfurization
- Silica-based amphiphilic nanofluid for enhanced heavy oil recovery: Performance and mechanistic insights
- A PAT methodology for the monitoring of vortex formation in single use bioreactors: FFT torque spectroscopy coupled with classification and regression models
- A redox-conjugated anthraquinone-perylene imide as a cathodic flow electrode for high-performance and energy-efficient asymmetric flow-electrode capacitive deionization
- Synergistic oxidation of singlet oxygen and superoxide radical: a novel platform for high-performance antibacterial photocatalytic textiles
- Machine-learning prediction of dynamic viscosity in IL-methanol mixtures: cross-method validation and reliability assessment
- Dual role of Valence-Engineered Pd in Ni-MOF: Boosting activity and steering selectivity for photo-thermal CO2 methanation
- Precise Manipulation of Co3+ Spin-State in Co3O4 via Cu doping for efficient CO oxidation
- Targeted removal of Ti from silicon melt using gas blowing refining based on timing regulation strategy assisted with machine learning method
- Enhancing light olefin production by pre-cracking and acidity tuning over hierarchical La/ZSM-5@ASA composites
- Quantitative correlation between cyclic voltammetry and electrochemical impedance spectroscopy models on TiO2 film electrodes
- Electron-Ion Cooperative Heterojunction Interface for Desolvation-Accelerated and Dendrite-Suppressed Zinc Metal Anodes
- Copolymer microstructure evolution in hydrodechlorination of PVC: A triad kinetics model for sequence modification
- Study on the pyrolysates characteristics, hydrogen migration and kinetics during CaCl2-assisted steam pyrolysis of oil shale
- Phosphogypsum impurity removal and purification: Electric field enhanced release of lead from phosphogypsum
- Nickel-based catalysts for selective semi-hydrogenation of alkynes and alkadienes in olefin purification
- Insights into the effects of varying hemicellulose and lignin ratios on cellulose pyrolysis within biomass: Kinetics and product evolution
- Multiscale analysis and process intensification for separating aromatics from diesel oil using imidazolium ionic liquids
- CuFe2O4-loaded modified semi-coke as peroxymonosulfate activator for efficient degradation of carbamazepine via 1O2-dominant non-radical pathway: synergistic effects of carbon defects and metal active sites
- Droplet size and motion analysis in the cavity region of a perforated-disk rotating packed bed based on high-speed imaging and U-Net segmentation
- Nanoplastics reshape methane adsorption and seepage pathways in heterogeneous cold-seep sediment nanopores
- Selective extraction of aromatics from FCC diesel using organic solvents: Separation performance and mechanism of dicyclic and tricyclic compounds
- Ultrafast microwave synthesis of a high-stability N-doped carbon-coated NiCoOx solid solutions for efficient peracetic acid activation and antibiotic degradation
- Acoustic agglomeration of fine particles enhanced by heterogeneous condensation revealed by stochastic simulations
- High-gravity-assisted synthesis of highly dispersible TiO2 nanoparticles for alicyclic epoxy-based nanocomposites with high refractive index and their application in LED packaging
- A novel method for comprehensive recovery of spent lithium iron phosphate cathode materials by co-extracting Fe(III)-P
- Drop coalescence at a liquid–liquid interface with solute concentration difference between drops and bulk liquids
- A phosphorus‑doped double perovskite catalyst enables an efficient and robust air electrode across low-to-high temperatures
- Adsorption-mediated flow resistance reduction in porous media with active nanofluid: Key implications for ultra-low permeability reservoirs
- A data-driven framework for coarse-mesh CFD error correction and rapid flow-field prediction in a mechanical flotation cell
- Catalytic promotion effect of sulfur-functionalized carbon materials on magnesium hydrogenation
- Combustion-driven kinetic confinement enables surface-gradient nitrogen doping for scalable photoelectrochemical water splitting
- Fractional optimal control strategies for chemical looping combustion systems
- Multidimensional analysis of the mechanism on heavy metal immobilization in MSWI FA: From pH stability to microscopic lattice distribution
- Semi-pilot hydrothermal conversion of kaolinitic waste to zeolite 4A: clay-bound pelletization with thermally induced porosity for copper(II) removal in batch and fixed-bed systems
- Urea-modified ZnO for photocatalytic naproxen degradation: structural and electrochemical insights
- Unveiling the interfacial polarization on Ni/SiC catalysts in microwave-assisted dry reforming of methane reaction
- In situ Raman characterization and visualization of microscopic dissolution and extraction of a CO2 + alkane + aromatics system
- A novel strategy for high conductivity and dimensional stability sulfonated polyimide proton exchange membranes for direct methanol fuel cells
- Different structure amine-functionalized mesoporous silica catalysts for trichlorosilane disproportionation: catalytic performance and mechanism analysis
