OPEN ACCESS
Coming soon
ABSTRACT
- Charge transport mechanisms of In4Se3/Cu Schottky diodes with an interfacial native oxide layer
- Two-step ruthenium atomic layer deposition with near-bulk resistivity for interconnects
- Erasing chemical history: fluorination-driven surface engineering of detonation nanodiamonds
- Surface chemistry and local electronic structure modulated by multicomponent alloying: unlocking high‑performance liquid‑metal thermal interface materials
- Interfacial charge transfer mechanisms in CeO2/MXene Schottky heterostructures with oxygen vacancies for high-performance SERS sensitivity
- Co single atom sites on mesoporous carbons derived from ZIF-8 precursors for high performance ORR
- Strengthening and toughening of ZnO/hBN van der Waals heterostructures: atomistically informed phase field modelling
- Compressive mechanical behavior of interpenetrating phases composites metal/polymer under quasi-static and dynamic loadings
- Electrical resistance tomography with deep image prior and its application in damage detection of C/SiC composite plates under high temperature
- Equivalent single layer model for laminated shells based on a stress approach
- Gap defect‑induced damage and failure process of prepreg tape wound composites: Visualization from in‑situ monitoring to finite element simulation
- Advances in intelligent manufacturing for high-energy-density and intrinsically safe lithium-ion batteries
- A NURBS-based multiscale viscoelastic model for polymer composite plates
- Web-crippling behavior of pultruded GFRP I-section profiles at elevated temperatures: experimental, computational and analytical studies
- Pomelo-peel-inspired dual-gradient TPMS lattices for temporal delay and spatial redistribution of impact loads
- Experimental and numerical analysis of a CF-PAEK beam under low and ultrasonic cyclic bending frequencies
- Frame-field-driven optimization for automated fiber placement of complex surface components
- Direction-aware material mapping for finite-element prediction of regional thermal deformation in multilayer printed circuit boards
- When coupon-scale testing fails: Scaling effects on Automated Fibre Placement defects
- Online gate-driven flow control in resin transfer moulding using a neural-network surrogate
- Thermal degradation-induced changes in the residual impact response and damage mechanisms of basalt fiber-reinforced polymer laminates
- Bimetallic CuBi clusters on nitrogen-doped porous carbon catalyst for efficient electrochemical CO2 reduction to ethanol
- Linking DFT-GCMC-MD simulations with adsorption kinetics to elucidate methylene blue uptake in coal-based AC/CNT hierarchical porous materials
- Similarity degree descriptor for screening the hydrogen evolution reaction of dual atom catalysts on N-doped grazyne support
- Transition from surface damage to subsurface shielding in multilayer graphene oxide coatings under contact loading
- Synergistic Polyaniline/Biochar Interface Engineering in Bilayered Metacomposites for Dual Dielectric Singularities and Microwave Absorption
- Physics-based criteria for total-fatigue-life prediction of mixed-mode delamination growth in composite laminates
- Decoupling bulk and interface defects in Ar/O2 plasma-treated SiO2/a-IGZO thin-film transistors by AC transconductance and photoinduced current transient spectroscopy
- Synergistic strategy of K doping and N defect modulation in tubular g-C3N4 for oxidation-driven photocatalytic degradation of organic pollutants
- Pd-based single-atom alloys reveal a transferable descriptor for nitrogen electroreduction
- Electrochemical reduction-induced oxygen vacancies in high-mass-loading NiCo2O4 nanosheets on carbon cloth for high-performance flexible solid-state supercapacitors
- Synergistic photocatalysis in TCPP-TiO2-graphene nanohybrids: a mechanistic study of Rhodamine B degradation
- A multi-stage interface model for hybrid fiber-reinforced cementitious composites: cohesive debonding, frictional wear, and macro–micro fiber hybridization
- On the design and crashworthiness of jigsaw-inspired interlocked and self-locked energy absorption systems
- Enhanced honeycomb sandwich structure based on electromagnetic metasurface for broadband electromagnetic absorption and load bearing
- Explicit symbolic-regression correction of Mori–Tanaka elasticity for short-fiber composites using full-field homogenization
- Improving the reinforcement efficiency of carbon fibers in polyamide 1012 composites fabricated by laser powder bed fusion
- Regulating diamond particle size enables low-residual-Si high-performance SiC ceramics via vat photopolymerization–reactive melt infiltration
- Hierarchical design of Ag@g-C3N4/CuxO-BiOCl photocatalysts for efficient solar hydrogen production: synergistic effect of Ag cocatalyst and Z-scheme heterojunction
- Selective flotation of ilmenite from titanaugite using 4-tert-butylcatechol under near-neutral conditions
- Study on carbonate anion intercalation performance and alkali reduction mechanism of CaFe-based layered double hydroxides in soda saline-alkaline soil
- Vibration analysis of tow-steered composite laminates using pixel-to-mesh modeling
- Optimization design of non-uniform two-scale lattice structures with superior isotropic stiffness
- 3D-printed continuous carbon fibre-reinforced composites with curved fibre trajectory: mechanism analysis and process optimisation
- Interlaminar fatigue delamination of fibre-reinforced polymer composites: a critical review on testing, material inhomogeneity, loading history and environmental ageing
- Selective flotation separation of galena and sphalerite enabled by depressant HDTMPA: multi-site coordination adsorption mechanism
- Resistive switching in large-scale MoS2 grown on Ag(111)
- Complementary barrier and chemical passivation effects of an rGO-Mg(OH)2/CeO2 nanocomposite for durable reduced-zinc epoxy coatings
- Process optimization and O2-plasma surface modification of low-temperature sputtered Te-based p-type thin-film transistors for complementary inverter applications
- Oxygen-mediated structural evolution of T800 carbon fibers under high-dose electron irradiation: From selective etching to graphitic framework degradation
- Thermal phase engineering of self-supported RuO2/MoO2/Fe2Mo3O8 electrodes for efficient hydrogen evolution in alkaline and neutral media
- Organic–inorganic dual n-Type TPA/TiO2 heterojunction with improved charge transport and band bending for photodetector applications
- High temperature oxidation induced novel oxide layer with superior corrosion resistance and wear resistance on EBM-fabricated Zr-2.5Nb alloy for orthopedic implants
- Interfacial engineering of one-dimensional/two-dimensional metal oxide nanowire-Ti3C2Tx MXene photoanodes for enhanced photoelectrochemical activity and photogenerated charge transfer
- Strengthening the metal–support interface to promote the thermal stability of Pt/CeO2 catalysts
- Low-temperature and partial closed-loop chemical recycling of glass fibre-reinforced recyclamine epoxy composites with fabric-scale recovery
- Preparation and fire-retardant mechanism of an APP II-based intumescent composite coating for forest-fire prevention
- Dynamic behavior of CFRP mechanical metamaterial core sandwich beams subjected to high-velocity particle slugs
- In-plane shear damage evolution and failure mechanisms of plain-weave SiCf/SiC at 1200 °C revealed by 4D in situ micro-CT
- From stress relaxation to healing protocols in vitrimer-based composites: Evidence from mode I fracture toughness recovery
- Benzoylthiourea-grafted metal oxides: surface functionalization and enhanced antibacterial activity
- Leaf-inspired Spider-Web “Capture-Damping” interphase enables dual-selective ion-water regulation for stable Zn deposition in treated-seawater zinc-ion batteries
- Process-property interplay in plasma-sprayed Fe-based metallic glass coatings: insights into passivation and semiconducting behavior
- Design and characterization of an interface between BaZrS3 thin films and Au
- Unlocking interfacial synergy in NiIn2S4/Sn-TiO2 nanofibers for highly efficient solar-driven CO2 reduction to methanol
- Transduction of bacterial-induced pathological DNA degradation into electrical and optical signatures via ITO/DNA Schottky-type capacitive bio-interfaces: a combined capacitance-voltage, Raman, and reflectance study for aquatic diagnostics
- Interfacial hybridization-driven coating enhancement of nano-Al@fluoropolymers: A continuous-flow electrochemical strategy for synergistic optimization of corrosion resistance and combustion performance
- Plasma-assisted dual-functionalization of heparin/chitosan coatings for antithrombogenicity ePTFE vascular grafts
- Small-molecule inhibitors for suppressing pyridine-catalyzed SiO2 atomic layer deposition on Al2O3: screening and mechanistic insights into acetylacetone passivation
- Synergistic high-temperature lubricating effect of cerium oxide and sodium montmorillonite at the interface of 42CrMo steel
- Molecule-dependent adsorption and electronic responses of a multifunctional hexagonal-like carbon cage toward toxic gases and nitroaromatic explosives
- Time-dependent interfacial evolution and enhanced corrosion inhibition of H59 brass by 6-aminoindazole
- Hollow Zn-N nanostructures via melamine-induced structural evolution of ZIF-8 for uric acid detection in artificial sweat
- Facile synthesis of FeCo@Golden Rosa Sterilis Residue (GRSR) composite through a pyrolysis reduction for activating peroxymonosulfate to eliminate oxytetracycline
- Enhanced tribological performance of MoS2 composite films via HEA-element doping: the role of densification and composite transfer films against simulated lunar dust
- Elucidating the mechanism of Fe-promoted Mn-Ni mixed oxides in boosting low-temperature NH3-SCR activity and SO2 tolerance
- Transient acid activation of molten-salt synthesized Mn3O4 for second-scale dye degradation
- Application of different-sized black phosphorus nanosheets as oil-based lubrication additives: an experimental and molecular dynamics simulation study
- Electrostatic self-assembly derived S‑scheme TiO2/Bi-MOF heterojunction for efficient photocatalytic CO2 reduction
- Unveiling the oxidation mechanism of AlCoCr0.5NiTi high-entropy alloys: a density functional theory study
- One material, two functions: Sm–Bi2WO6/TiO2 nanoflowers for visible‑light photodegradation of oxytetracycline and colorimetric sensing of gallic acid
- Surface and interfacial reaction mechanism between CoCrMo alloy melt and aluminosilicate ceramic-fiber crucibles during rapid induction melting
- Material-structure synergistic regulation and integrated optimization of energy absorption in graphene-based negative-Poisson’s-ratio metamaterials
- Study on molding defects, crystallization behavior, and their effects on EMI shielding performance of carbon fiber fabric/PEEK composites
- Autoregressive modelling and synthetic generation of high-fidelity, statistically equivalent 3D microstructures for as-manufactured misalignments in fiber-reinforced composites
- Strong built-in electric field induced by surface band bending in hydrogen-terminated diamond
- In vacuo X-ray photoelectron spectroscopy study of the isotropic atomic layer etching mechanism of zirconium oxide
- Thermo-mechanical behaviour of carbon/epoxy material after long-term exposure to a cryogenic liquid
- Engineering broad-temperature viscoelastic response in silica-filled ternary elastomer composites for ice traction
- Effect of Z-pin embedded length on the multi-scale delamination toughening of CNF-modified non-crimp carbon fibre composites
- Hyperbranched modified Ag nanowires Achieved uniform and stable dispersion of Binary Ag system for High-Performance conductive adhesives
- Phase-field simulation of crystal growth in fiber-reinforced semi-crystalline polymers
- Coupled damage-plasticity model for predicting the nonlinear off-axis behavior of ply-level hybrid carbon composites
- Multiscale modelling analysis of mechanical performance and progressive damage for metal-quadriaxial braided laminated composites hybrid connection structures
- Thermal shock crack propagation in functionally graded materials using an adaptive meshfree phase-field method
- Asymmetric flexural wave reflection in passive piezoelectric metamaterial beams with circuit network coupling
- Experimental Characterization, Constitutive Modeling and Numerical Validation of Natural Fabric Reinforced Elastomeric Isolators
- Fatigue resistance and thermal characterisation of additively manufactured carbon fibre reinforced PEEK (CFR-PEEK) specimens for biomechanical applications
- Distorted dynamic similitude of cylindrical shells with various material preparation defects in a thermal environment
- A multifunctional lattice structure integrating high in-plane thermal conductivity with high out-of-plane load-bearing capacity
- Thermally stable and active Pt/Ag2O/MnOx/Co3O4 catalyst for CO oxidation: Insights into the role of Ag2O and MnOx doping
- Interfacial engineering of wear-resistant slippery liquid-infused porous surface for S3N4 fiber protection
- Dual-heteroatom-mediated electronic modulation of Ru nanoclusters toward efficient hydrazine oxidation-assisted hydrogen evolution
- Toward iron upcycling for green hydrogen: target engineering for powder-derived iron-based nanoparticles by laser ablation in water
- Mo-induced amorphous/crystalline heterointerfaces engineering strategy regulating Co spin state to enhance peroxymonosulfate activation for antibiotics degradation
- Crosslinking-state-dependent matrix plasticity in UD CFRP: Sequential multiscale prediction of ply properties and structural failure
- Experimental characterization of the influence of bolt-hole clearance on the bearing damage scenario of a CFRP
- Isogeometric analysis of nonlinear vibration and stability of Macro-fiber composite (MFC)-layered smart structures with arbitrary fiber orientations considering piezoelectric nonlinearities
- A hierarchical damage constitutive model considering natural microstructural characteristics of flax fiber for the nonlinear tensile behavior of its reinforced composites
- In-situ construction of CaCO3 nanoparticle-decorated biochar from Ca-rich spent mushroom substrate for efficient Cd(II) and Zn(II) immobilization
- Cu-modified RuO2 nanozyme supported on carbon nanotubes for enhanced peroxidase-like catalysis and sensitive colorimetric detection of uric acid
- Anisotropic lithium diffusion in single-crystal silicon anodes: atomic-scale insights for enhanced lithium-ion batteries
- Modulating the energy landscape for inducing on-surface thermal trans → cis switching of an azobenzene derivative by metal doping
- Ce-introduced ZnSnO3 hollow cubic structures for enhanced 1-octen-3-ol gas sensing toward grain spoilage monitoring
- Engineering a CeO2@Cu-TiO2 core–shell catalyst with Cu-O-Ce interfaces for simultaneous NH3 and Hg0 oxidation: Unraveling asymmetric SO2 tolerance
- Interfacial engineering of Cu-decorated graphene for strength–conductivity synergy in aluminum matrix composite
- Transition from mesoscale instability to fibre strength controlled compression failure in carbon fibre composites
- Four birds with one stone: CuS/MoS2 heterojunction fillers-inspired polylactic acid nanofiber membrane with high filtration, photothermal antibacterial activity, keep warming and degradability
- Deformable liquid metal-functionalized MXene/cellulose nanofiber composite films enabling efficient electromagnetic interference shielding and thermal management
- A mechanism-grounded roadmap for hydrogen storage in edge-functionalized Li-decorated 2D carbon frameworks: synergistic DFT and machine learning insights
- Photodetector based on AgBiS2 quantum dots/monolayer MoS2 mixed-dimensional heterostructures
- Boosting in‑situ CoOOH generation on Co3O4 via La doping for enhanced electrocatalytic 5‑hydroxymethylfurfural oxidation
- Mechanical performance and damage evolution of MWCNT modified filament wound glass/epoxy composite pipes under burst pressure, low velocity impact (LVI) and compression after impact (CAI) loading
- A micromechanical framework for the ductile-to-brittle transition in particulate biocomposites: Validation on starch/olive stone systems
- Curcumin-Functionalized ZnO Integrated Bio-Based poly (ethylene furanoate) smart labels for active packaging and Real-Time shrimp freshness monitoring
- A computational framework for efficient global analysis of initially curved and twisted composite beams
- Compression-compression fatigue of glass-fibre non-crimp fabric composites by four-point flexure
- Thermal stability of flax-fabric-reinforced cementitious materials (F-FRCM): Shielding role of the mineral matrix
- Resin-to-laminate translation of mechanical and fracture responses in GFRP laminates with a nanomodified epoxy matrix
- Interfacial characterization and process control on the co-curing of foam-core composite stiffened panels integrating FBG and piezoelectric sensor network
- Experimental and numerical investigation of curvature evolution in bistable CFRP laminates under multi-point loading
- Fatigue analysis of 3D woven composite subjected to biaxial traction/torsion loading
- Self-healing of interlaminar and impact damage in carbon fiber-reinforced laminates with thermoplastic interleaves
- Aqueous fabrication of PVOH/PHA multilayer structures via thermal consolidation
- Flotation of quartz from fluorapatite using N-Dodecyl-N, N-dimethyldodecan-1-aminium chloride: separation behavior and interfacial adsorption mechanism
- Quasi van der Waals epitaxy of AlN via 2D WS2-mediated heteroepitaxy
- Microenvironment regulation of COF-based single-atom catalysts for nitrogen reduction: A DFT and machine learning study
- Identification and elucidation of Al–O–C–Al chemical bond formation at metal-polymer interface
- Density functional theory study into oxygen-coordination-dependent CO modulation on the sintering behavior of palladium subnanoclusters
- Developing a multifunctional micro-arc oxidation coating with superior anti-corrosion, scratch and antibacterial properties on aluminum alloy
- Application of integrated epoxy electrically insulated piezoresistive carbon fiber sensors in strain sensing of CFRP structures
- Effect of proton irradiation on the corrosion resistance behavior of SS 304 L
- Interface-engineered graphene oxide for controlled nanoparticle organisation and tunable plasmonic response
- Multi-objective optimization research on shot peening strengthening of meshing gear of wet brake discs for heavy-duty vehicles based on CFD-DEM
- Construction of Z-scheme BiVO4/PCN photocatalyst for highly-efficient H2 production integrated with PET derivative degradation
- Effects of laser beam oscillation modes on the formation of non-melting laser gas-nitrided layers on Ti–6Al–4 V alloy: experimental and numerical investigation
- Ti3C2Tx MXene-derived quantum dots with mixed terminations for humidity sensing: experimental studies and theoretical investigation via DFT
- Bi0.5Sb1.5Te3-enabled interface engineering for enhanced broadband self-powered n-Si/MoTe2 photodetection
- Study on high-temperature wettability and heat transfer mechanism at KNO3-LiNO3-NaNO3 molten salt/AlN ceramic surface
- Exploring charge transport across TiN–graphene interfaces using DFT–NEGF: implications for platinum-free counter-electrode in dye-sensitized solar cells
- A polyurethane-based marine antifouling coating with synergistic oxidative-stress-mediated biocidal and self-polishing effects
- Interfacial charge transfer modulation over CoPc/Oxygen-modified g-C3N4 heterostructure for boosted photocatalytic CO2 reduction
- Linking in-process Automated Fiber Placement metrology to Mode I fracture response and process-zone morphology in composite laminates
- Mode II debonding of adhesive joints in composites: Experimental evidence and identification of an appropriate cohesive zone model
- Superhydrophobic t-ZrO2/Epoxy composite coating for durable corrosion protection of aluminum alloy
- Magnetically-recyclable Co@N-doped graphene shells for cooperatively catalyzing selective hydrogenation of o-chloronitrobenzene
- Synergistic ternary N–Mn–Ni vacancies and dual O-scheme heterojunction for boosting photocatalytic H2 evolution from aqueous formaldehyde
- Elucidating the SMSI mechanism of the support effect in promoting CO oxidation and sulfur resistance
- Enhanced piezo-photocatalytic tetracycline degradation and hydrogen evolution over Al/N co-doped ZnO via asymmetric lattice strain engineering
- Solvent-mediated topological transformation of ZIF-67 on diatomite for durable corrosion protection of magnesium alloys
- Graphene oxide vs. Reduced graphene oxide as nanofillers: molecular dynamic simulation and experimental analysis
- Effect of Si and Ti codeposition on the microstructure and high-temperature behavior of niobium silicide coatings
- Two-dimensional confinement of Ag nanoparticles on BiVO4 via facet-selective photodeposition for plasmon-enhanced SERS detection
- Surface group-mediated catalytic regulation in Fischer-Tropsch synthesis: mechanisms and recent advances
- Cascade matching of PtAu sites and rehydrated MgAl-LDH solid-basic interfaces for soluble-base-free HMF oxidation to FDCA
- Growth of InxGa1-xN/GaN quantum wells on 3C-SiC (001) by metal-modulated epitaxy
- Synergistic enhancement of flexible supercapacitor performance via MXene-mediated electronic regulation and oxygen-bridge interface coupling
- Influence of ply orientation and effective propagation interfaces on mode II delamination of QIQH CFRP laminates
- Full‑field strain–microstructure analysis of fibre‑reinforced composites under biaxial loading using X-ray computed tomography and digital volume correlation
- Investigation of mesoscopic and microscopic damage evolution in 3D woven composites based on SCA-DPNN concurrent multiscale damage model
- Mechanically–assembled hypercube metastructure with metal rubber conical shell for tunable hysteretic behaviour and orthogonal anisotropy
- A rapid free-vibration characteristics prediction method for plain-woven shells with cutouts
- Stable-standoff-guided thermal-stress prediction and control schemes in laser directed energy deposition
- Voronoi-based vacuum leakage detection in composite manufacturing
- Modelling of process-induced defects in tow-steered composites obtained by Automated Fibre Placement
- Interfacial Defects between CNTs: Heat Transfer and Load-Induced Enhancement
- Morphology engineering of Sillén-Aurivillius phase Bi4NbO8Cl unlocks efficient piezocatalytic H2O2 production
- Microstructure evolution and enhanced electrochromic performance of anodized nanoporous WO3 films: role of annealing temperature
- Defect-induced self-doping enables efficient charge transfer in Cu2-xS (x = 1, 0, 0.2) for enhanced SERS properties
- Synergistic surface chemistry of ZIF-8/melamine composite for enhanced chlortetracycline adsorption: a combined experimental and DFT study
- Facile method of obtaining cotton fabrics with dual-phobic surface properties
- Boosting interfacial catalytic oxidation in Pickering emulsions stabilized by pH-responsive N-graphene quantum dots
- Triboelectric nanogenerator-assisted rapid bonding of Si/GaAs through a hydroxylated Al2O3 interlayer
- Influence of surface density of molecules adsorbed on Ce-Fe-based bimetallic oxysulfate upon the photocatalytic degradation of Rhodamine B
- Damage-controlled laser etching of monolayer WS2
- Tailoring the gradient substructure of metastable duplex stainless steel through ultrasonic surface rolling and controlled annealing
- Thermal stability of sputter-deposited Molybdenum thin films for interconnect applications
- Core-composition-dependent interfacial redox reactivity of silica-coated magnetic abrasives for tungsten chemical mechanical planarization
- Natural-Grid mesoscopic constitutive model for TPU-Coated woven fabric considering angle evolution
- Delamination damage mechanism of CFRP composites driven by pyrolysis-induced internal pressure and thermal stress in fire environment
- Data driven prediction model of effective thermal conductivity of random composites
- Estimating the flexural modulus of a hybrid flax/basalt/PA-11 laminate from high-speed nanoindentation mapping and a rule of mixtures
- Magnetic field-directed chain and layered architectures control deformation-mode-dependent viscoelasticity in ultra-soft hydrogel composites
- In-situ strain and stress monitoring of CFRP composite laminates under different process conditions using FBG sensors and its impact on interfacial properties
- Exploration of pullulan as a new environmentally friendly selective depressant of calcite in fluorite flotation separation
- Frequency-dependent dielectric behavior of aerosol jet-printed nanodiamond thin films
- Multidentate phytic acid-grafted Ti3C2Tx MXene electrocatalysts for fast faradaic kinetics in vanadium redox flow batteries
- Interfacial adsorption mechanism of a novel gemini amino-hydroxamate collector and its enhanced effect on smithisonite flotation
- P- and N-doped Si9C15 monolayers as efficient hydrogen storage materials: A first-principles study
- Transparent nonvolatile ReRAM based on Cu2O-graphene core–shell quantum dot/PMMA hybrid switching layers
