OPEN ACCESS
Coming soon
ABSTRACT
- A hybrid algorithm framework for heat exchanger networks synthesis considering the optimal locations of multiple utilities
- Identification and characterization of particle clusters in fluidized beds via image processing technique: Method development and assessment
- A rigorous model for hydrogen response in industrial propylene polymerization loop reactors: From micro-mechanism to macro-behavior
- Bridging uncertainty gaps with artificial intelligence-assisted syngas precise prediction in coal gasification
- Insight into the adsorption mechanism of arsenic and selenium by different mineral adsorbents
- Heterogeneous electro-Fenton oxidation of Congo red using carboxylic group activated carbon felt cathode: Electrokinetic mechanism and performance
- Pressure drop prediction in the compressible powder bed of pulverized coal during gas pressurization
- Fully-Exposed Pt Cluster@Zeolite catalysts for efficient n-Hexane aromatization
- Numerical simulations of equilibrium, kinetics, and chain length distribution in linear polycondensation proceeding in nano-scale small volumes: An apparent violation of the law of mass action
- Structural optimization of the NiFe2O4 spinel catalyst aimed at efficient electrocatalytic C-O bond cleavage of lignin
- Nitrate and phosphate removal by capacitive deionization using nanocellulose/polypyrrole electrodes
- Modulating low-temperature interfacial polymerization with NaHCO3 for high-performance ultrathin nanofiltration membranes
- PEG-assisted synthesis of highly dispersed Cs/Zr-SiO2 catalyst for aldol condensation of methyl acetate with formaldehyde
- Computer aided flow investigation of liquid agricultural wastes
- Screening and preparation of functionalized TpBD-COFs for CO2 capture
- Bifunctional Ni2P/SAPO-11 catalyst for simultaneous hydroisomerization of 1-hexene and hydrodesulfurization of thiophene
- The effect of subcooling on hydrate generation and solid deposition with two-phase flow of pure water and natural gases
- Insights into the effect of Fe-Zn interaction on tunable reactivity in Fischer–Tropsch synthesis
- Underwater antiadhesion hydrogel coatings with spontaneous segment orientation
- Expert label for explainable fault diagnosis and for unknown fault generalization
- Ceramic catalytic membrane with low metal ion leaching for bisphenol A removal via peroxymonosulfate activation
- Thermal mineralization of Perfluorooctanoic acid (PFOA): The synergistic role of oxygen and water vapor inhibiting products of incomplete destruction (PID) formation
- Phosphorylated litchi shell-derived biochar for removal U(VI) from mining wastewater
- A robust and efficient solution for COSMO-based activity coefficient models
- Numerical simulation of gasifier optimization for combined hydrogen production and carbon reduction in a chemical looping gasification (CLG) system
- Experimental and numerical study of wall phenomena of confined bubble flow in a square channel
- Formation characteristics of CaSO4·2H2O passivation layer during rhodochrosite leaching by sulfuric acid: Mineralogy and molecule simulation perspectives
- Continuous micro feeding and mixing of solid dosage forms under vibrational excitation
- Zeolite-carbon composite synthesis and its adsorption property
- Experimental study and numerical simulation of aqueous mineral carbonation of Ca(OH)2 in a bubble column
- Investigation on the multi-scale interactions in gas–liquid jet bubbling reactor
- Insights into the coupling of H2S adsorption and subsequent C4H4S hydrogenation over Ni–Mo composite adsorbents
- The study of parameter diagram for stable drop-on-demand droplet formation
- Development and application of vegetable oil-based polyurethane coated fertilizers
- Probing the interaction mechanisms of lipid nanoparticle-encapsulated mRNA with surfaces of diverse functional groups: Implication for mRNA transport
- Photoresponsive microfluidic three-phase emulsions for tandem reactions
- Simulation of two-phase flow in network mixers using periodic boundary conditions
- Fick and Maxwell-Stefan diffusion of the liquid mixture cyclohexane + toluene + acetone + methanol and its subsystems
- Continuous synthesis of a silver-based primary explosive with high purity
- Experimental evaluation of novel gas liquid contactor packing based on triply periodic minimal surfaces (TPMS)
- Numerical study of bischofite precursor droplet evaporation and thermal decomposition for spray pyrolysis systems
- Direct numerical simulation of dispersion and mixing in gas–liquid Dean-Taylor flow with influence of a 90° bend
- CO2 methanation on Ni/Y2O3 Catalysts: The effects of preparation procedure and cerium oxide promotion
- Novel spherical and homogeneous Alstonia Scholaris silver nanoparticles for dual applications: Detection of ultra-trace amounts of Cr(III) ions and MB discoloration sustained by 3-input AND gate
- Modelling of the effects of driving signal parameters on the droplet formation dynamics in piezoelectric inkjet
- Robust batch-to-batch optimization with global sensitivity analysis for microbial fermentation processes under model-plant mismatch
- Rational combination of Inverted-Pyramid structured Nickel-based Prussian blue with porous 3D carbon as high-performance sodium-ion batteries cathode
- An inertial number regulated constitutive model for the gas-fluidization of binary mixtures across dilute and dense regimes
- Process-driven solvent screening for efficient extractive distillation using interpolative rational functions
- Water sorption behavior of poly(norbornene)-based anion exchange polyelectrolytes: Experiments and simulation
- Enhancing lithium-storage properties through amino functionalization in two-dimensional lamellar carbon-supported mesoporous SiO2 nanospheres
- Forecasting methanol-to-olefins product yields based on Relevance Vector Machine with hybrid kernel and rolling-windows
- Effects of the boundary conditions at the gas-liquid interface on single hydrogen bubble growth in alkaline water electrolysis
- An experimental investigation on role of turbulence modulation induced by thread structure in coaxial air blast atomization of a surfactant-laden jet
- Insight into microscopic mechanism of Pt/Pd-catalyzed pyrolysis of n-dodecane
- Numerical simulation of jet break-up in the second-wind induced regime using the local front reconstruction method
- High-entropy Na4Fe2.65(NiCrMgCoMn)0.027(PO4)2P2O7 cathode for high-rate sodium-ion batteries
- Dynamic modeling of a direct reduced iron shaft furnace to enable pathways towards decarbonized steel production
- Sulfur defect engineering boosted nitrogen activation over FeS2 for efficient electrosynthesis of ammonia
- Dielectric barrier discharge plasma for chlorobenzene removal: Performance optimization, process modeling, and toxicity evaluation
- Modeling and analysis of polypropylene copolymer properties and pressure stability for integrated tubular loop reactor and MZCR
- Regulating the electronic state of Pd nanoclusters and Lewis acid density by the carbon doping for synergistically enhancing phenol hydrogenation in green solvent
- Machine learning uncovers analytical kinetic models of bioprocesses
- SnS/C nanostructures endowed by low-temperature in-situ carbothermal reduction of sustainable lignin for stable lithium- and sodium-ion storage
- Unraveling the transition of ZIF-67-on-ZIF-8 core–shell structured dodecahedron formed by an oriented attachment mechanism from type II to step-scheme for enhanced photocatalytic degradation of oxytetracycline hydrochloride
- Engineering the electronic structure of Pt for selective hydrogenation of vanillin to vanillyl alcohol and p-cresol
- Renewable oleyl based surfactants for application in liquid explosive high internal phase emulsions
- Spatial characteristics study of hydrodynamics and bubble dynamics in baffled stirred tank based on CLSVOF method
- The interactions of protein-calcium oxalate in crystallization process
- pH-Responsive removal of dyes from wastewater using MXene composited L-Cysteine-grafted HEMA hydrogel: Dynamics, selectivity, regeneration and mechanism
- Investigation of Third-Grade fluid flow in an inclined Microchannel: Utilizing the Hermite wavelet technique for second law analysis
- Entropy generation analysis for designing efficient and sustainable heat exchangers and chemical reactors: From 1D modelling to detailed CFD simulations
- Effect of ultrasonic frequency on mass transfer of acoustic cavitation bubble
- Synthesis of desulfurization solvent networks based on process characteristics: New insights of desulfurization units and a novel synthesis method
- Influence of micromixing and shear on precipitation process in the jet-flow high shear reactors
- Corrigendum to “Numerical simulation study of the influence of stirred vessel structure on particle suspension characteristics in dilute solutions” [Chem. Eng. Sci. 300 (2024) 120587]
- Insight into pyrolysis characteristic and mechanism of natural rubber using rapid infrared-heating fixed bed combined with pyrolysis kinetics
- Estimating contact angle of pure and mixed liquids on smooth solid surfaces using dispersive-to-attractive surface energy ratio from PCP-SAFT model
- Ammonia-regulated dynamic evolution of Ti precursor incorporating into dealuminized beta for efficient 1-Hexene epoxidation
- Monolayer calcium-doped layered yttrium hydroxide adsorbent for rapid and efficient removal of fluoride from industrial wastewater
- Zn-doped bentonite catalysts for waste engine oil cracking: Thermal treatment offers a cleaner alternative to acid activation
- Droplet size, spray structure and droplet velocity mapping in hollow cone sprays using SLIPI-based techniques
- Research progress of PVA conductive hydrogel-based wearable biosensors in sweat detection
- DFT calculation and experiments for Li+/H+ ion-exchange on titanium-based lithium ion-sieves
- Water model study on the mixing behaviour of gas-liquid two-phase flow for the SKS lead reduction process in a bottom-blown furnace
- Promising urea electrosynthesis by C-N coupling on copper-based single-atom alloys
- Adaptive fault diagnosis for high-purity carbonate process based on unsupervised and transfer learning
- Refined kinetic model for the simulation of polycarbonate synthesis via continuous melt transesterification
- Regeneration of perfluorooctane sulfonic acid (PFOS) loaded granular activated carbon using organic/inorganic mixed solutions
- Room-temperature solution processed silicon nanocluster: Theory prediction and experiment achievement
- Fe3 cluster-anchored monolayer MoS2 for direct deoxygenation of phenol: Catalyst design and activation mechanism
- Effect of high solids loading on gas–liquid mass transfer in an oscillatory flow reactor for process intensification
- Unveiling the enhanced catalytic performance of low-Si/Al-ratio beta-zeolite on C4 alkylation combing with experiments and molecular simulations
- Effect of physicochemical properties on critical sinking and attachment of respirable coal mine dust impacting on a water surface
- Macroporous cellulose microspheres with high specific surface area via semi-dissolved chitosan templating for protein separation
- Optimization of ammonia production unit using polymeric membrane: Re-design of ammonia synthesis reactor feeding strategy and methane removal
- Chemical bond dissociation insights into organic macerals pyrolysis of Qinghua bituminous coal: Vitrinite vs inertinite
- Amine-impregnated as-synthesized silicas for CO2 capture: Experimental study and mechanism analysis
- Droplet dynamics in a constricted microchannel
- Reinforcement learning based gasoline blending optimization: Achieving more efficient nonlinear online blending of fuels
- Corrigendum to “A revisit from CVD kinetics to CVD reactor: Investigating uniform growth mechanism of polysilicon in a reduction furnace” [Chem. Eng. Sci. 295 (2024) 120162]
- Aging mechanisms and kinetics of bis(2,2 dinitropropyl) formal facilitated by transition state bifurcation and HONO catalysis
- New global multi-objective optimization of compact heat exchanger
- Effects of separation sequences on the reactive distillation coupled with extractive distillation under different pressures
- Learnings from up-scaling CO2 capture: Challenges and experiences with pilot work
- Surface activity, wettability and foam properties of quaternary ammonium surfactants with C-F/Si-H double hydrophobic backbone
- Artificial neural network aided unstable combustion state prediction and dominant chemical kinetic analysis
- Experimental investigation and CFD study of direct reduction of iron ore in the conical fluidized bed
- Investigation on thermochemical heat charging and discharging behavior of Ca(OH)2/CaO in a fixed bed reactor
- Nox removal from Small-Scale biomass combustion in DC Corona: Influence of discharge polarity on plasma chemical kinetics
- Three-dimensional numerical study on finned reactor configurations for ammonia thermochemical sorption energy storage
- Modulation of slug flow characteristics observed in three-phase solid-liquid-gas flow measurements
- Erosive wear and particle attrition in multi-stage solar particle receivers and screw conveyors: A CFD-DEM approach with machine learning and artificial neural networks
- Optimization and safety analysis for CO oxidative coupling reactor with co-current thermal management
- Clathrate hydrate formation in the presence of sodium lignin sulfonate
- Modeling of dynamic bubble deformation and breakup in T-junction channel flow
- Polydopamine/copper nanoparticles synergistically modified carbon foam/octadecanol composite phase change materials for photothermal energy conversion and storage
- Prediction of space heating and formaldehyde degradation behaviors for the sorption heat storage-photocatalysis combined solar envelope
- A comprehensive fault detection and diagnosis method for chemical processes
- Particle size distribution degradation model for PEM fuel cell Pt/C catalyst based on population balance equation
- Integrating knowledge-guided symbolic regression and model-based design of experiments to automate process flow diagram development
- A novel intermediate heat exchange intensified extractive pressure-swing distillation process for efficiently separating n-hexane-tetrahydrofuran-ethanol
- Two-dimensional model in a laminar flow slit photoreactor for the determination of surface kinetic constants considering the presence of diffusion limitations
- Evaluation of the prediction capability of mesoscale CFD models on velocity fluctuations in liquid-solid flows
- Regulation of the size and flow pattern of yield stress droplets in flow-focused microchannels by orifice constraints
- Hybrid modeling for improved extrapolation and transfer learning in the chemical processing industry
- Sequential optimal experimental design for vapor-liquid equilibrium modeling
- Path-Sampling and Machine Learning for Rare Abnormal Events: Application to Polymerization CSTRs
- Numerical simulation study of the influence of stirred vessel structure on particle suspension characteristics in dilute solutions
- Modeling reactive film flows down a heated fiber
- Graph transformer based transfer learning for aqueous pKa prediction of organic small molecules
- Operation optimization of propane pre-cooled mixed refrigerant LNG Process: A novel integration of knowledge-based and constrained Bayesian optimization approaches
- Pyrolysis-gasification conversion of waste pharmaceutical blisters: Thermo-kinetic and thermodynamic study, fuel gas analysis and machine learning modeling
- Scalable droplet generator design using parallel-arranged capillaries with axial misalignment
- Pyrolysis conversion of multi-layer packaging waste under a CO2 atmosphere: Thermo-kinetic study, evolved products analysis and artificial neural networks modeling
- Gas-liquid countercurrent flow characteristics in a microbubble column reactor
- Preparation of nitrogen-doped magnetic carbon microspheres and their adsorption and degradation properties of tetracycline hydrochloride
- The determination of the solubility, enthalpy, and entropy of solutions of methyl Furan-2,5-Dimethylenedicarbamate and its hydrides in different solvents
- Optimization of exergy destruction minimization in moving bed heat exchanger with airflow-assisted cooling
- Amphiphilic super-macroporous cryogel particles for the high-efficiency separation of bio-butanol using a fixed-bed method
- Tunable swelling features in poly(ionic liquid)s for intensified catalytical synthesis of ethyl methyl carbonate with high yield and selectivity
- Corrigendum to ‘Removal of Cd(II) and Pb(II) from synthetic wastewater using Rosa damascena waste as a biosorbent: An insight into adsorption mechanisms, kinetics, and thermodynamic studies’ [Chem. Eng. Sci. 280 (2023) 119072]
- Assessment of sulfuric acid as pH control agent in catalytic nitrate reduction in drinking waters
- Numerical analysis of fluid flow and heat transfer characteristics in single crystal diamond microchannels with ribs and secondary channels
- Residual mass prediction of powder discharged from hopper at non-gravity directions
- Microfluidic mass transfer of supercritical in brine
- PCN-222/H3PW12O40/graphene oxide@cotton cloth with improved photocatalytic/photothermal properties for water decontamination
- Cryogenic-membrane separation process for helium extraction and ethane co-production from natural gas
- Super-stable mineralization of arsenic contaminated water using industrialized layered double hydroxides and derivatives
- Modeling oil/water emulsion separation in batch systems with population balances in the presence of surfactant
- Screening of highly efficient electrocatalysts for hydrogen peroxide synthesis using single transition metal atoms embedded in carbon vacancy fullerene C60
- Intracrystalline diffusion regulation of Au/hierarchical TS-1 for simultaneously enhanced stability and selectivity in propene epoxidation with H2 and O2
- In-situ wet milling for particle size control in continuous crystallization: Expanding the attainable region
- Mg-Al layered double hydroxides modified by 2,4,6-trimercapto-s-triazine for effective removal heavy metals from soil
- GPU-powered CFD-DEM framework for modelling large-scale gas–solid reacting flows (GPU- rCFD-DEM) and an industry application
- Shapes and terminal velocities of single bubbles rising through fiber bundle in stagnant water
- Unveiling the enhanced reactivity of NO ozonation on NH4-SAPO-34 zeolite: Ab initio molecular dynamics combined with experimental characteristics
- Optimization of automated anodizing plant efficiency and process prediction using Random Forest based Levy flight method
- From waste to value: Electrocatalytic reduction of nitrate into ammonia at mono and bimetallic-CNT modified electrodes
- Ultrafast and efficient extraction of heparin via cationic brush magnetic adsorbents
- Zwitterionic channels within covalent organic frameworks facilitate proton-selective transport for flow battery membrane
- Development of molten salt–based processes through thermodynamic evaluation assisted by machine learning
- Sodium-doped carbon nitride for visible light-driven photocatalytic reforming lignocellulose into H2 and chemicals
- Characteristic parameters measurement and flow prediction of slug flow based on ultrasound technology
- Molecular-scale insights into nanoconfined water-CO2 interactions in geological carbon storage
- Metal ionic liquid-based hybrid membranes for ammonia separation through moderate interaction sites and cooperative transport channels
- Electron-rich Ni3Zn strongly interacted on ZnO promoter for deep hydrogenation of phenanthrene in dibenzothiophene
- Unraveling and in-situ observation on the interfacial mechanical behavior of the NEPE propellant reinforced by NPBA via molecular dynamics simulation
- Enhancing fractionation of terpenoids and terpenes in citrus essential oils by a biphasic extraction system
- Heat and mass transfer limitations of released power for thermochemical heat storage process: Three main operation modes
- NMR transverse relaxation times and phase equilibria of methane hydrate in mesoporous alumina
- Kinetics study and reaction modeling of 2,3-dichloro-1-propanol with alkali to prepare epichlorohydrin
- Stable Pt/MgAl2O4 catalysts for efficient production of H2 from cyclohexane dehydrogenation
- Carbon-coated Al2O3 supported Co3O4 nanoparticles for Fischer-Tropsch synthesis: Effect of surface carbon properties
- Reinforced convolutional neural network fault diagnosis of industrial production systems
- Experimental study of the dynamics and mass transfer behavior of carbon dioxide bubble at different constraint limits
- An eco-friendly wheat straw adsorbent functionalized with mercaptopropionyl for the removal of Cu(II) from aqueous solution
- Al2O3-Encapsulated TiO2 flower-like spherical mesoporous material for efficient removal of PCl3 traces
- Interpretable GHG emission prediction for papermaking wastewater treatment process with deep learning
- A new paradigm in critical flow analysis: Combining Buckingham Pi theorem with neural network for improved predictions in microchannels
- Cu nanowire – impregnated activated carbon fiber for antibacterial applications
- Hydrodynamics in a randomly packed bed of cylindrical particles: A comparison between PR-CFD simulations and MRI experiments
- Boron doped Mo/HMCM-22 catalyst for improving coke resistance in methane dehydroaromatization
- Satellite droplet formation and its inertial separation in integrated microchannels
- Developing an online composition prediction for an HI–I2–H2O system using deep neural network
- Experimental study of cryogenic oxygen–nitrogen mass transfer characteristics on microtextured plates
- Depth dewatering of kaolinite cake by SDBS/PEI synergy and a mesoscopic mechanism study
- Rigorous modelling and optimization of hybrid absorption-adsorption separation process of H2/CH4 using ZIF-8/glycol/water slurry
- Robust statistical industrial fault monitoring: A machine learning-based distributed CCA and low frequency control charts
- Enhanced nitrogen electroreduction to ammonia activities on Sb2S3 electrocatalyst by sulfur defects coupled with carbon doping
- Removal of pesticide residues from vegetables by hydrogen peroxide assisted ultrasonic process
- Study on coupling characteristics of thermal-fluid-chemical multi-physics field in CaCO3/CaO thermochemical exothermic reactor
- Novel concept for 3D-printed, baffled micro-fluidized beds for the regulation of bubble behavior and the suppression of solid back-mixing: Experiments and simulations
- Self-assembled copper herbal carbon dots nanosheets with powerful antibacterial properties: A robust cascade antioxidant nanozyme for scavenging reactive oxygen species
- Comparative study of different inorganic particles addition on the properties of chitosan/calcium sulfate composite bone cement
- Unveiling ionic redox potentials: Advancing prediction through large-scale MLMD and FEP integration
- Oxidative stability of structurally varied amines for post-combustion CO2 capture
- Enhanced coke resistant Ni/SiO2@SiO2 core–shell nanostructured catalysts for dry reforming of methane: Effect of metal-support interaction and SiO2 shell
- Intrinsic kinetics of steam methane reforming over a monolithic nickel catalyst in a fixed bed reactor system
- Decarbonizing hydrogen supply chain via electrifying endothermic processes